123
5. 6K/4K Photo and Drive Settings
Selecting pictures from 6K/4K burst file and
saving
This section describes how to select pictures from a 6K/4K burst file and save them.
For information on how to record 6K/4K burst files, refer to
.
1
Select an image with the [
] or [
] icon on the playback
screen, and press
3
.
• You can also perform the same operation by touching the icon [
] or
[
].
• If the image was recorded with [6K/4K Pre-Burst], proceed to step
3
.
3
Drag the frames to select the frame you want to save
as a picture.
• You can also perform the same operation by pressing
2
/
1
.
• Touch and hold [
]/[
] to continuously rewind/forward
frame-by-frame.
4
Touch [
] or [
] to save the picture.
• A confirmation screen will be displayed.
∫
Saving pictures taken with the 6K/4K Photo function at once ([6K/4K PHOTO Bulk
Saving])
You can save pictures of a 6K/4K burst file that were extracted from any 5 second period
at once.
1
2
Press
2
/
1
to select the 6K/4K photo burst files and press [MENU/SET].
• If the burst time is 5 seconds or less, all frames will be saved as pictures.
3
Select the first frame of the pictures to be saved at once.
• Select the frame in the same way as you select pictures from a 6K/4K burst file.
• Pictures will be saved as a group of Burst Mode pictures in JPEG format.
2
Drag the slide bar to make a rough selection of
scenes.
• For information on how to use the slide view screen, refer to
.
• If the image was recorded with [6K/4K Burst] or [6K/4K
Burst(S/S)], you can select its scenes on the 6K/4K burst
playback screen by touching [
] (Fn1).
Slide view screen
• The picture will be saved in JPEG format.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
>
[Playback]
>
[6K/4K PHOTO Bulk Saving]
Fn2
Fn1
MENU
