Panasonic Live Production Suite Series Page 131 Operating Manual Download

Page: 131 / 176

– 131 –

Chapter 8 System Menu — Boot operation settings

Boot operation settings

Boot mode settings

Select the <SYS> button

→

[BOOT]

→

[Boot] tab.

Select an item in the [Boot Mode] column.

Select the status of the switcher when it boots up.

[Resume]

The switcher boots up with the settings as they were immediately before it was turned off.

[Initial]

The switcher boots up with the initial settings as they were when it was delivered.

[Project]

The switcher boots up with the settings found in the specified project file.

Specify the project file by selecting [File Select] and then specifying it in the file selection dialog.

It is not possible to make settings to the detailed items loaded from the specified project file.

Summary of Contents for Live Production Suite Series

















































































































































































Search results

Summary of Contents for Live Production Suite Series

Reviews:

Related manuals for Live Production Suite Series

Brands by name

Popular brands

Panasonic Live Production Suite Series, Operating Manual

Search results

Summary of Contents for Live Production Suite Series

Reviews:

Related manuals for Live Production Suite Series

Brands by name

Popular brands