Panasonic Live Production Suite Series, Operating Manual

Page: 154 / 176

– 154 –
Chapter 11 Appendix — Setting menu table
Setting menu table
This section describes the menu configuration. To perform menu operations, select the top menu → secondary menu → menu tab → item. For details
on basic menu operations, refer to “Basic menu operations”.
@ @ NOTE
t
This document shows the menus at their largest possible configuration. Some menu items may not be displayed, depending on the system delivered.
t
The values and initial values in the columns and for the various items are standard values. Some may be different depending on the system delivered.
<ME1>/<ME2> button (top menu)
[KEY1]/[KEY2] (secondary menu)
[Key Setting] tab
Column Item Setting item Default
[Key Type] ― [Lum], [Linear], [Chroma],
[Full]
[Linear]
― [Lum Key] [Chroma Off], [Chroma
On]
[Chroma
Off]
― [Key Invert] [OFF], [ON] [OFF]
[Fill] ― [Bus], [Matte] [Bus]
[Source Type] ― [Ext Key], [Self Key] [Ext Key]
― [Clean Key] [OFF], [ON] [OFF]
― [Source Split] [OFF], [ON] [OFF]
[Mask] [Mask] [OFF], [ON] [OFF]
[Type] [FG], [BG] [FG]
[Invert] [OFF], [ON] [OFF]
[Box Matte] [Box Matte] [OFF], [ON] [OFF]
[Multi] [H] [1], [2], [4], [8] [1]
[V] [1], [2], [4], [8] [1]
[H/V Sync] [OFF], [ON] [ON]
[Modulation] [H Pattern] [Sine], [Delta] [Sine]
[V Pattern] [Sine], [Delta] [Sine]
r
R menu of the [Key Setting] tab
R menu Item Setting item Default
[Key Adjust] [Clip] [0.0] - [108.0] [0.0]
[Gain] [0.0] - [200.0] [100.0]
[Density] [0.0] - [100.0] [100.0]
[Fill Matte] ― (Color palette screen) ―
[Hue] [0.0] - [359.9] [0.0]
[Sat] [0.0] - [100.0] [0.0]
[Lum] [0.0] - [108.0] [100.0]
[Mask Adjust] [Left]
[ − 50.00] - [50.00] [ − 25]
[Top] [
−
50.00] - [50.00] [25.00]
[Right] [ − 50.00] - [50.00] [25.00]
[Bottom] [ − 50.00] - [50.00] [ − 25]
[Box Adjust] [X]
[ − 50.00] - [50.00]
[0.00]
[Y] [
−
50.00] - [50.00] [0.00]
[H Size] [0.00] - [100.00] [50.00]
[V Size] [0.00] - [100.00] [25.00]
[Density] [0.00] - [100.00] [25.00]
[Box Matte] ― (Color palette screen) ―
[Hue] [0.0] - [359.9] [0.00]
[Sat] [0.0] - [100.0] [0.00]
[Lum] [0.0] - [108.0] [0.00]
[H Modulation] [Amplitude] [0.00] - [100.00] [0.00]
[Frequency] [0.00] - [100.00] [0.00]
[Speed]
[ − 50] - [50]
[0]
[V Modulation] [Amplitude] [0.00] - [100.00] [0.00]
[Frequency] [0.00] - [100.00] [0.00]
[Speed] [
−
50] - [50] [0]
[Transition] tab
Column Item Setting item Default
[In Type] ― [CUT], [MIX], [WIPE] [CUT]
― [In Time] ― [01s00f]
― [WIPE
PATTERN]
(Wipe pattern screen) ―
[Out Type] ― [CUT], [MIX], [WIPE] [CUT]
― [Out Time] ― [01s00f]
― [WIPE
PATTERN]
(Wipe pattern screen) [5]
[Position] [Over Center] [OFF], [ON] [OFF]
[Key Transition
Curve]
[MIX] [Linear], [S Soft], [S Mid],
[S Hard]
[Linear]
[WIPE] [Linear], [S Soft], [S Mid],
[S Hard]
[Linear]
r
R menu of the [Transition] tab
R menu Item Setting item Default
[In Time] [In Time] [0s00f] - [16s39f] [01s00f]
[In Position] [X-Pos] [
−
100.00] - [100.00] [0.00]
[Y-Pos] [ − 100.00] - [100.00] [0.00]
[Out Time] [Out Time] [0s00f] - [16s39f] [01s00f]
[Out Position] [X-Pos] [
−
100.00] - [100.00] [0.00]
[Y-Pos] [ − 100.00] - [100.00] [0.00]
[Chroma] tab
Column Item Setting item Default
[Auto Compute] [Auto Compute] ― ―
[Reset] ― ―
[Adjust] [Narrow] [Off], [0.5], [1.0], [1.5] [Off]
[Chroma PVW
Mode]
― [Off], [Key1], [Key2] [Off]
[Chroma PVW
View]
― [Composite], [Matte],
[Proc.FG], [FG]
[Composite]
[Sampling
Mode]
― [Select BG], [Clean BG],
[Clean FG], [Sponge],
[Fine Tuning]
[Select BG]
― [Sampling] ― ―
[Select BG] [Point] [OFF], [ON] [OFF]
[Sponge] [Sponge] [Spill − ], [Matte + ], [FG
Trans], [Detail + ]
[Spill − ]
― [Undo] ― ―
r
R menu of the [Chroma] tab
R menu Item Setting item Default
[Phase Adjust] [Phase] [ − 4.0] - [4.0] [0.00]
[Sample Area] [X-Pos]
[ − 50.00] - [50.00]
[0.00]
[Y-Pos] [
−
50.00] - [50.00] [0.00]
[Size] [1.00] - [100.00] [10.00]
[Fine Tuning] [Spill]
[ − 1000] - [1000]
[0]
[Trans] [
−
1000] - [1000] [0]
[Detail] [
−
1000] - [1000] [0]