Panasonic Live Production Suite Series, Operating Manual, Page: 76 / 176

– 76 –
Chapter 5 Basic Operations — Internal color signals
Internal color signals
The unit supports two lines of internal color signals.
Setting the color background
Set the color of the color background to be used by the bus.
The color can be set by setting the hue (Hue), saturation (Sat), and luminance (Lum), or by recalling the preset eight colors. The recalled colors can also
be adjusted using [Hue], [Sat], and [Lum].
Adjusting the colors
1
Select the <CBGD> button
→
[CBGD]
→
[CBGD] tab.
2
Adjust the color.
f
Select [Main Color] in the R menu and adjust the color in the color palette screen.
Setting the gradation
Set the gradation effect for color backgrounds.
Selecting the gradation effects and setting the colors
1
Select the <CBGD> button
→
[CBGD]
→
[CBGD] tab.
2
Select an item in [Wash] in the [CBGD1]/[CBGD2] column.
[ON] Adds the gradation effect.
[OFF] Does not add the gradation effect.
3
Select an item in [Color Type] in the [CBGD1]/[CBGD2] column.
[Dual] Adds a 2 color gradation effect using the [Main Color] and [Sub Color] set in the R menu.
[Rainbow] Adds the rainbow color gradation effect.
4
Adjust the color.
f
When [Dual] is selected, select [Sub Color] in the R menu and adjust the color in the color palette screen.
f
When [Rainbow] is selected, select [Rainbow] in the R menu and set [Rainbow Sat] and [Rainbow Lum] in the encoder menu.
Adjusting the gradation waveforms
1
Select the <CBGD> button → [CBGD] → [CBGD] tab.
2
Select an item in [Pattern] in the [CBGD1]/[CBGD2] column.
[Sine] Selects sine waves.
[Saw]
Selects sawtooth waves.
3
Select [Wave] in the R menu, and set [Cycle], [Phase], and [Angle] in the encoder menu.
[Cycle]
Selects the gradation cycle.
[Phase] Selects the gradation phase.
[Angle]
Selects the gradation angle.
Setting the gradation movement
1
Select the <CBGD> button
→
[CBGD]
→
[CBGD] tab.
2
Select an item in [Move Type] in the [CBGD1]/[CBGD2] column.
[Off] Sets no movement.
[Roll] Scrolls the gradations.
[Rotation] Rotates the gradations.
3
Select [Wave] in the R menu, and set [Speed] in the encoder menu.
f
Set the speed of the gradation movement.