background image

EN-

38

EN-

39

 English

  Troubleshooting

Sounds and Noises

 Symptom

 Possible  cause

 Noise is heard during 

heating.

 Various sounds may be heard depending on the type of 

cookware. You may feel a small vibration when you hold 

the handle and the cookware may move slightly.

  This is not a malfunction. Moving the cookware 

slightly or replacing it may eliminate the sound.

 If the cookware is removed during heating, a short 

metallic sound may be heard.

 The level of the noise 

from the appliance 

increases and 

decreases.

 It is the sound of the cooling fan inside the appliance. 

The level of noise changes according to the power level 

and the material of the cookware. When the power level 

is increased, the fan will operate at high speed and 

generate more noise.

 After the main power 

switch is turned off, 

sound from the fan can 

still be heard.

 While the inside of the appliance is still hot, the cooling 

fan operates. When the appliance cools down, it will 

automatically stop.

 Clicking noise is heard

at the start of fl ex

cooking operation.

This is not a malfunction. This is a part of induction 

heating technology. The noise is eliminated during 

operation.

Heat Power

 Symptom

 Possible  cause

 The heating power is 

weaker.

  Overheating  Prevention  Function

 If the base of the cookware overheats, the heating 

power will automatically reduce. The power indication 

will remain the same. The power returns to normal after 

the cookware cools down.
Unsuitable cookware, e.g. ceramic and earthenware 

pans, are used.

  Do not use ceramic and earthenware pans even 

if they are for induction heating as they are not 

effi cient. 

(See page 16)

 When multiple cooking 

zones are used together,

 

 The heating power 

decreases.

 

 The power indicator 

automatically 

decreases.

 

 The power level can 

not be increased.

 The power level is automatically regulated so that 

overall power consumption does not exceed the limit. 

(See page 13)

 The power indicator for a cooking zone may decrease 

on its own. 
Even after touching the 

5

0:02

 slider to adjust 

power level , it may not increase the power level and the 

appliance will beep. 

  Troubleshooting

Summary of Contents for KY-T937VL































Reviews: