EN-
44
EN-
45
English
Please fully observe the following safety precautions.
IMPORTANT
■
Unpack the appliance, remove all packing material, and examine for
any damage. If the appliance is damaged DO NOT install and notify
your dealer immediately.
■
Install the appliance in accordance with the Installation Instructions.
Otherwise, the performance of the appliance may be affected.
■
After installation, perform a test run and explain to the customer
how to operate the appliance.
■
Correct installation is the responsibility of the installer. Any
malfunction or accident resulting from the failure to follow
Installation Instructions is not covered by the warranty.
Safety Instructions
■
When performing the installation, follow these
instructions completely. Improper installation
may cause an electric leakage or fire.
■
Install 220-240 V dedicated single-phase (or
three-phase at 380-415 V 3N) circuit with the
earth leakage circuit breaker for the power
supply. The electrical wiring may abnormally
overheat if the dedicated circuit is not properly
connected.
Installation Instructions
Installation and Connection
■
Electrical work must be performed by a legally
qualified electrician. Improper wire connections
may cause electric leakages or fires.
■
This appliance must be properly earthed
following the electric laws. Earth line must not
be connected to gas pipe, water pipe, earth
of a lightning rod or telephone. Otherwise, it
may cause electric shock in case of appliance
breakdown or insulation breakdown.
■
Have a qualified electrician earth the appliance.
Improper earthing may cause an electric shock.
■
Before performing the installation, turn off the
circuit breaker. This can prevent electric shock.
■
If the power cord is damaged, it must be
replaced by a service technician authorised by
the appliance manufacturer in order to avoid a
hazard.
■
Do not disassemble, repair or modify the
appliance (e.g. the top plate). Doing so may
cause the appliance to operate abnormally and
may be dangerous.
Safety Instructions