background image

EN-

10

EN-

11

 English

 General Controls                           

 Right  front 

 Left  front 

 Right  rear 

 Left  rear 

 Top  plate

 Cooking  zone

 Cooking  zone

Middle

 General Controls                           

Switching on the appliance for the fi rst time

Main Menu

Control Panel

Main Power

1.   Touch and hold the main power 

key to turn on the power. 

 The main power light illuminates 

when the main power is turned on.

2.   Select the desired language, and 

touch 

 to confi rm and continue 

to the main menu.

  Hot Surface Warning

 

 

Illuminates when any area of the top plate is hot.

Take care not to touch cooking zones when this is 

displayed.

Control Panel Lock

 

Lock the control panel enabling cleaning of small 

spills in that area.

 

This will disable the control panel for 20 seconds.

 

 To deactivate within 20 seconds, touch 

 key 

again.

Information

 

Show important additional information on the 

function currently being used.

 

Touch 

 key again to back to the main menu.

Kitchen Timer

 

Counts down from a set time and sounds an alarm 

when it reaches zero. Kitchen Timer does not turn 

off the cooking zones.

 

 For more details on how to set the timer, see page 30.

* While cooking zone is in operation

5

2:30

1-9

Summary of Contents for KY-T937VL































Reviews: