Panasonic KXTVS100 - VOICE MAIL SYSTEM, Quick Installation Manual, Page: 29 / 91

6.29
6. To exit the Station Programming mode, press the PROGRAM button
or lift the handset.
7. Repeat these steps for each telephone.
Conditions: This button must be a CO or DSS/BLF button to be programmed as a TWR button.
When all Voice Mail ports are busy and this key is pressed, the user will hear reorder tone.
T
WO
-W
AY
T
RANSFER INTO
M
AILBOX
This feature allows an extension user to record a conversation into another user’s mailbox by pressing the Two-
Way Transfer button followed by the mailbox number. This is commonly used by a person who is taking a
detailed message for someone else and wants the message recorded in the mailbox at the same time.
T
WO
-W
AY
T
RANSFER
(TWT) B
UTTON
A
SSIGNMENT
For the Two-Way Transfer feature to work at an extension, the extension must have a TWT button on it. This
key must be either a DSS/BLF or CO key (must have a lamp). Follow the procedure below to assign a TWT
button on an extension. (This is a
station level program and should be done at each individual phone.)
1. Enter PITS programming:
a. With the phone on-hook, press the PROGRAM button.
b. Dial [99]. (Display changes to PT-Prg Mode.)
2. Press the desired FLEXIBLE (CO or DSS/BLF) button that you want to assign as the
TWT button.
3. Dial [90].
Screen Output: 2 Way-Trans:
4. Enter a Voice Mail extension number.
Screen Output: 2 Way-Trans: _ _ _
(_ _ _ = The extension number you entered).
5. Press STORE.
6. To exit the Station Programming mode, press the PROGRAM button
or lift the handset.
7. Repeat these steps for each telephone.
Conditions: This button must be a CO or DSS/BLF button to be programmed as a TWT button.
When all Voice Mail ports are busy and this key is pressed, the user will hear reorder tone.