Panasonic KXTVS100 - VOICE MAIL SYSTEM, Quick Installation Manual, Page: 24 / 91

6.24
Step 2
From the System-Prg No. ? screen:
1. Enter [116].
2. Press the NEXT button (sp-phone).
3. Enter the system number ([0] or [1], master/slave).
The system displays the ROM version and date it was created.
This version must be P101A with a date of 05-08-95 or later for Digital Integration to be utilized
(both systems if system connection is used).
V
OICE
M
AIL
P
ORT
A
SSIGNMENT
This program tells the PBX which jacks will be connected to the Voice Mail system. This allows the PBX to
send the proper Digital Integration information to those ports.
From the System-Prg No. ? screen:
1. Enter [117].
2. Press the NEXT button (Sp-Phone).
Screen Output: Master: # # #
3. Enter the jack number of the first port you will use
for the Voice Mail (02 - 64).
4. Press [
→]
to enter the next jack number.
5. Enter the second jack to be used for Voice Mail.
6. Repeat Steps 4 and 5 until all jacks are entered.
7. Press STORE.
8. Press the NEXT button to program the slave system (if connected).
9. Press END (Hold) when finished.
Conditions: Jack 01 cannot be used as a Voice Mail port. A jack programmed as a Manager
Extension (prg. 006) cannot be used in this program. The jack numbers correspond to Voice Mail port
numbers in numerical order. The lowest jack entered here must be connected to the first port of the
VPS.
Example:
Jack 02 = Voice Mail numbers 01, 02; Jack 03 = 03, 04
(Each jack entered gives two Voice Mail ports.)
V
OICE
M
AIL
E
XTENSION
N
UMBER
A
SSIGNMENT
This program allows you to assign an extension number to each Voice Mail port. Since each jack connected to
the VPS provides two extensions, this enables you to assign extension numbers to each port. You can assign any
extension number that is not already assigned to another port. To reach the Voice Mail system, users dial these
extension numbers. It is not necessary to change the default programming for the extensions 165, 166, 167,
168.
From the System-Prg No. ? screen:
1. Enter [118].
2. Press the NEXT button (Sp-Phone).
Screen Output: VM NO?
→
3. Press the NEXT button (Sp-Phone).
Screen Output: VM-01:#_ _ -1: 165
( _ _ = the first port number you entered in program 117).