Panasonic KXTD7690 - BTS 2.4 GHZ WIRELESS User Manual Download

Page: 90 / 96

Troubleshooting

The alarm sounds after
pressing the Redial
button.

• The Call Log contains no entries.

The PS stops working
during operation.

→

Turn the power OFF and ON. Then try again. (See “Power On/Off” on

page 7.)

→

Re-insert the battery and try again. (See “Setting Up” on page 5.)

The display does not
show a strong radio
signal “

” even

though you are near the
CS.

• Obstacles (such as walls or partitions) are interfering with the radio

waves sent between the PS and the CS.

• The nearest CS may be occupied, and as a result the PS may be

linked to a CS that is further away.

• In general, the PS can be used when signal strength is “

” or

higher.

The alarm sounds
during a conversation
while receiving a weak
radio signal “

”.

• The radio signal is weak.

→

Move closer to the CS.

Problem

Description and Solution

Summary of Contents for KXTD7690 - BTS 2.4 GHZ WIRELESS
































































































Search results

Summary of Contents for KXTD7690 - BTS 2.4 GHZ WIRELESS

Reviews:

Related manuals for KXTD7690 - BTS 2.4 GHZ WIRELESS

Brands by name

Popular brands

Panasonic KXTD7690 - BTS 2.4 GHZ WIRELESS, User Manual

Search results

Summary of Contents for KXTD7690 - BTS 2.4 GHZ WIRELESS

Reviews:

Related manuals for KXTD7690 - BTS 2.4 GHZ WIRELESS

Brands by name

Popular brands