Panasonic KXTD7690 - BTS 2.4 GHZ WIRELESS User Manual Download | Manualshive

Page: 45 / 96

background image

44

Battery Information

After your Panasonic battery is fully charged [at 25 °C (77 °F)]:

• Battery charge may be shortened depending on usage conditions and ambient

temperature.

• The battery cannot be overcharged.

• The battery will drain even while the unit is “OFF”.

• The PS can receive calls while charging.

• Battery consumption increases when the PS is used out of range. If “

” flashes, power

off the PS.

Low Battery Warning

The battery needs to be charged in the following situations:
• “

” flashes or the alarm sounds every five seconds

*

.

• When

“

CHARGE BATTERY

”

is displayed, charge your PS for 6 hours. When “

CHARGE

BATTERY

”

is displayed, the PS cannot be operated.

*

If the low battery warning occurs during a conversation, you can continue for another

minute, and then the call will be disconnected automatically.

Replacing the Batteries

If “

” flashes after a few telephone calls even when the batteries have been fully

charged, it is time to replace the batteries with new ones.
Before replacing the batteries, turn the power off to prevent memory loss. Please charge
the new batteries for 6 hours.
Not following this procedure will result in improper Battery Strength metering.
• Please order Panasonic battery with service part No. N4HUGLB00001 to replace.

Operation

While in use (Talk)

While not in use (Stand-by)

Approx. battery charge

Up to about 8 hours

Up to about 120 hours

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type of battery recommended by the
manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
The product that you have purchased contains a rechargeable battery. The battery is
recyclable. At the end of its useful life, under various state and local laws, it may be
illegal to dispose of this battery into the municipal waste stream. Check with your local
solid waste officials for details in your area for recycling options or proper disposal.

CAUTION:

A lithium ion battery that is recyclable powers the product you have purchased.
Please call 1-800-8-BATTERY for information on how to recycle this battery.

Important Information

«
...
43
44
45
46
47
...
»

Summary of Contents for KXTD7690 - BTS 2.4 GHZ WIRELESS

































































































Reviews:

No comments

Related manuals for KXTD7690 - BTS 2.4 GHZ WIRELESS

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands