Panasonic KXTD7690 - BTS 2.4 GHZ WIRELESS User Manual Download | Manualshive

Page: 47 / 96

background image

46

Important Information

3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns

or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

4. Exercise care in handling batteries in order not to short the battery to conductive materials

such as rings, bracelets, and keys. The battery and/or conductor may overheat and cause
burns.

5. Charge the battery provided with or identified for use with this product only in accordance

with the instructions and limitations specified in this manual.

6. Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalence type recommended by the manufacturer.

Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this device.

NOTICE:

Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Privacy of communications may not be ensured when using this telephone.
Some wireless telephones operate at frequencies that may cause interference to nearby TVs
and VCRs. To minimize or prevent such interference, the wireless telephone should not be
placed near, or on top of, a TV or VCR. If interference is experienced, move the wireless
telephone farther away from the TV or VCR. This will often reduce, or eliminate, interference.
Operating near 2.4 GHz electrical appliances may cause interference. Move away from the
electrical appliances.
To prevent radio interference to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
The wireless handset may be occasionally used outdoors as permitted by government
regulations.
Take special care to follow the safety suggestions listed below.

Safety

1) The unit should be connected to a power supply only of the type described in the operating

instructions or as marked on the unit.

2) When left unused for a long period of time, the charger should be unplugged from the household

AC outlet.

Installations
Environment

1) Do not use this unit near water— for example, near a bathtub, washbowl, sink, etc. Damp

basements should also be avoided.

2) The unit should be kept away from heat sources such as radiators, kitchen range, etc. It

also should not be placed in rooms where the temperature is less than 5°C (41 °F) or
greater than 40°C (104 °F).

3) The AC adaptor is used as the main disconnect device, ensure that the AC outlet is located/

installed near the unit and is easily accessible.

«
...
45
46
47
48
49
...
»

Summary of Contents for KXTD7690 - BTS 2.4 GHZ WIRELESS

































































































Reviews:

No comments

Related manuals for KXTD7690 - BTS 2.4 GHZ WIRELESS

KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008...

Brand: Panasonic Pages: 212

TELES.iPBX 8TR Box

Brand: TELES Pages: 83

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands