manualshive.com logo in svg

Panasonic KXF-293C, Operating Instructions Manual

Share
Download
Panasonic KXF-293C Operating Instructions Manual Download Page 54

Page 3-2

293C-E-EMA03-A01-01

3-1

Changing the Production Data

This section describes loading data from PT as an example. To load data from PT, two ways of “a)
Transferring from PT to this machine” and “b) Loading by the file operation” are available.

• To load data of the floppy disk, see “Chapter 6 File Operation.”

∗

Loading data to use deletes data used by now. To store data used by now, save it.

NOTICE

See “Chapter 5 Teaching” for carrying out the board recognition, bad mark, and
dispensing recognition teaching.

a) Transferring from PT to this machine

1.

Display the main menu screen and
send data of the production board to
change from PT.

∗

See “PROGRAMMING MANUAL” for sending
data from PT.

• Sending data from PT changes the data name

on the right of screen to the sent one.

Summary of Contents for KXF-293C





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands