manualshive.com logo in svg

Panasonic KXF-293C, Operating Instructions Manual

Share
Download
Panasonic KXF-293C Operating Instructions Manual Download Page 24

Page 24

293C-E-EMA00-A04-03

3

Precautions for Handling Disks

M37E

OBSERVE THE FOLLOWING ITEMS WHEN HANDLING FLOPPY DISKS.

Floppy disks and the data in them can be destroyed.

CAUTION

Eject button
Do not press this button
while the access indicator
lamp is lit.

Access indicator lamp

Do not eject the disk or turn off the power supply while the disk drive access indicator
lamp is lit.

Direct sunshine

Dust

Case

Disk

High or low temperature

The disk should be put in the case pro-
vided for storage or transportation.

A disk should not be stored or left in
areas exposed to the following
conditions:

Do not apply excessive force to the disk.

Do not place heavy objects on the disk.

Automatic shutter

The automatic shutter should not be
opened. Do not touch the magnetic circu-
lar disk inside.

Refrain from smoking, drinking and
eating close to the disk.

Any loose labels should be re-
placed with new ones.

 Do not place the disk in the
vicinity of a motor, CRT, or
anything that may generate a
magnetic field.

Do not attach a new label over an old one.

Do not bring a magnet close to the
disk.

High humidity

HANDLING FLOPPY DISK

Summary of Contents for KXF-293C





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands