![background image](http://html.mh-extra.com/html/panasonic/kx-vc500cn/kx-vc500cn_user-manual_262538083.webp)
–
"OFF"
(default): Communication will not
become audio only, even if there is network
congestion.
Note
•
To select
"ON"
,
"Quality of Service"
must
be set to
"Audio"
.
•
Contents cannot be shared while in Audio
only mode.
•
When connecting to an MCU or
non-Panasonic video conference system,
or when one of the other parties is using an
older software version, communication will
not become audio only even if
"Audio only
mode"
is set to
"ON"
.
•
When changing to Audio-only mode, it may
take some time for the blue screen to be
displayed. Until the blue screen is
displayed, the image may become
distorted.
"Still image quality"
: Use
[
][
]
to select the
display resolution to use when you send still images
from the sub video camera to other parties.
–
"Full HD"
(default): The resolution of still
images is Full HD.
–
"HD"
: The resolution of still images is HD.
Note
•
If the network has low bandwidth and a
high rate of packet loss, selecting
"HD"
is recommended. For details,
contact your dealer.
•
During a 4-party video conference call,
the display resolution will be
"HD"
, even
if you have specified
"Full HD"
.
"Default MIC Mute set"
: Use
[
][
]
to select
whether to mute the microphone(s) at the start of a
received video conference call.
–
"ON"
: Mutes the microphone(s).
–
"OFF"
(default): Does not mute the
microphone(s).
"Call Limit time"
: Enter the maximum length of
time for the duration of a video conference call (in
hours and minutes).
Note
•
If you set 0 hours 0 minutes (default), the
call time is unlimited.
•
If the duration of a video conference call
exceeds the specified length of time, the call
will be automatically disconnected.
"MIC detection"
: Use
[
][
]
to select whether to
enable the detection of the connection status of the
Boundary Microphones.
–
"ON"
(default): Enables the detection of
Boundary Microphones.
–
"OFF"
: Disables the detection of Boundary
Microphones.
Note
•
When not using Boundary
Microphones, set this to
"OFF"
.
"Network Connection Status"
: Use
[
][
]
to
select whether to display the network status
indication.
–
"ON"
(default): Displays the network status
indication.
–
"OFF"
: Hides the network status indication.
"Active call Menu"
: Use
[
][
]
to select whether
to display the guide when a video conference call
begins.
–
"ON"
(default): Displays the guide.
–
"OFF"
: Hides the guide.
"Noise reduction"
: Use
[
][
]
to select whether
to enable noise reduction when a video conference
call begins.
–
"ON"
: Enables noise reduction.
–
"OFF"
(default): Disables noise reduction.
5.
Press
[G]
.
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use
[
][
]
to select
"Yes"
and press
[Enter]
.
•
The system settings screen is displayed.
7.
Press
[Home]
.
•
The Home screen is displayed.
Making Screen Standby
Settings
When the unit or remote control are not operated or a
video conference call is not received for a specified
length of time, the unit enters standby mode. You can
set the length of time here.
1.
Press
[Menu]
.
•
The Menu screen is displayed.
User Manual
83
Contacts and Settings