Reducing Microphone Noise
You can reduce the amount of ambient noise picked up by the microphone (shuffling of papers, etc.) during a
video conference call. When noise reduction is in effect, the volume level of voices may also be reduced.
1
Press
[Y]
.
•
"Whisper Mode [ON]"
is displayed, and noise
reduction is enabled.
•
Pressing
[Y]
again will display
"Whisper Mode
[OFF]",
and noise reduction is disabled.
Note
•
Noise reduction is available only when Digital
Boundary Microphones are connected.
•
You can set whether to enable noise reduction
for a video conference call before starting the
call (Page 123).
•
After a video conference call is finished, the
noise reduction setting returns to the value set
before starting the call.
•
When
""Y" Button during MCU"
in
"GUI
Settings"
is set to
"Discussion /
Presentation"
, you can switch the MCU mode
by pressing the
[Y]
button during calls that use
the MCU (except for KX-VC1000) (Page 154).
•
This feature is disabled for KX-VC1000, and
noise reduction is not displayed on the
[Y]
button
in the shortcut key area. If the unit has been
expanded for 4 Point Built-in MCU support, the
option to change the MCU mode is assigned to
the
[Y]
button during video conferences that use
the MCU.
1
88
User Manual
Document Version 2018-01
During Video Conference Calls
