manualshive.com logo in svg

Panasonic KX-UTG300, Operating Instructions Manual

Share
Download
Panasonic KX-UTG300 Operating Instructions Manual Download Page 2

Introduction

Feature Highlights

Easy Operation

You can easily access features using the Navigator key, fixed buttons, and soft buttons.
Also, the Message/Ringer lamp will inform you when you have an incoming call or a message waiting.

High-quality Voice Communication

This unit supports the standard SIP protocol and the G.722 codec, enabling reliable and high-quality voice
communication.

ECO Mode

Enabling ECO mode allows you to use this unit while reducing the amount of electricity consumed
(Page 50).

Compatible with Electric Hook Switch (EHS) Headsets

This unit supports EHS headsets (Page 66).

Compatible with Bluetooth

®

 Wireless Headsets

This unit supports Bluetooth wireless headsets (Page 66).

Outline

This manual describes information about the installation and operation of the unit.

Related Documentation

Getting Started

Briefly describes basic information about the installation of the unit.

Administrator Guide

Describes information about the programming and maintenance of the unit.

Manuals and supporting information are provided on the Panasonic Web site at:

http://www.panasonic.com/sip

Note

•

The contents and design of the software are subject to change without notice.

2

Operating Instructions

Document Version  2014-11  

Introduction

Summary of Contents for KX-UTG300













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands