manualshive.com logo in svg

Panasonic KX-UTG300, Operating Instructions Manual

Share
Download
Panasonic KX-UTG300 Operating Instructions Manual Download Page 100

USB Devices

Issue

Possible Cause & Solution

Reference

The USB device I
connected does not work.

•

You connected a USB device that this unit does not support.

→

This unit supports only standard USB keyboards and USB
flash drives with a capacity of up to 32 GB.

→

Consult your administrator or dealer for information on
supported devices.

•

The maximum number of connected devices has been
exceeded.

→

Only 1 USB headset, 1 USB hub, 1 USB keyboard, and 1
USB flash drive can be connected to the unit at a time.

Page 76

The keyboard I connected
does not work.

•

The USB keyboard is not connected correctly.

→

Check whether the keyboard is connected correctly. If it is
not connected correctly, disconnect it, and then connect it
again.

Page 13

Some of the keys on the
USB keyboard do not
work.

•

You are using a key that is not supported by this unit.

→

Confirm which keys are supported.

Page 60

100

Operating Instructions

Document Version  2014-11  

Appendix

Summary of Contents for KX-UTG300













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands