manualshive.com logo in svg

Panasonic KX-UTG300, Operating Instructions Manual

Share
Download
Panasonic KX-UTG300 Operating Instructions Manual Download Page 67

When connecting the Ethernet cable

•

Connect the cables as shown in the following illustration.

Ethernet cable

Ethernet cable

60 mm (2 

3

/

8

 in) 

or less

Incorrect

Correct

•

Use the included Ethernet cable.

When connecting to a switching hub

•

If PoE is available, an AC adaptor is not needed. An AC adaptor must be used when the KX-UTA336
Add-on key module is installed to the unit.

•

This unit complies with the PoE Class 2 standard.

When connecting a PC

•

Only a PC can be connected to the PC port. Other SIP phones, or network devices such as routers
or switching hubs, cannot be connected.

•

The PC port does not support PoE for connected devices.

When connecting cables and the AC adaptor

•

Ensure that the Ethernet cables and the AC adaptor cord are clamped to prevent damage to the
connectors.

When registering a Bluetooth headset

•

One Bluetooth headset can be registered to this unit. For details, see "Connecting the Bluetooth
headset (Page 76)".

Document Version  2014-11  

Operating Instructions

67

Installation and Setup

Summary of Contents for KX-UTG300













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands