manualshive.com logo in svg

Panasonic KX-UTG300, Operating Instructions Manual

Share
Download
Panasonic KX-UTG300 Operating Instructions Manual Download Page 66

Connections

This section explains the ports and connectors on the unit.

Connections for AC Adaptor/LAN/PC

To a switching hub (Ethernet cable)

To a PC (Ethernet cable)

To an EHS

Optional AC adaptor

AC adaptor

Clamp

Handset

Headset

To a handset jack  

(handset)

To a headset

CAUTION

Optional AC Adaptor

•

Use the following AC adaptor:

–

DSA-42D-48 2 480063 (P/N: 381.00398.005)

•

The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near
the unit and is easily accessible.

When connecting a headset

•

Ensure that the headset cord has slack and is not pulled tight during use to prevent damage to the
connectors.

•

Cords used to connect devices to the EHS jack or headset jack must be less than 3 m (9.8 ft) in
length.

•

Only 1 USB headset can be connected to the unit at a time.

Notice

•

The following headsets can be used with this unit. (Not all operations with the headsets can be
guaranteed.)

–

EHS headsets/USB headsets
Selected Plantronics

®

-brand headsets

Selected Jabra

®

-brand headsets

–

Bluetooth headsets

For up-to-date information about headsets that have been tested with this unit, refer to the
following web site:

http://www.panasonic.com/sip

66

Operating Instructions

Document Version  2014-11  

Installation and Setup

Summary of Contents for KX-UTG300













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands