Useful Information
32
Wall mounting
Base unit
1
Remove the base unit stand by
pushing (
A
) and sliding down (
B
).
2
Mount the base unit by inserting the
screws into the round openings on
the unit, then slide the unit down to
secure it.
Note:
L
Make sure that the wall is strong
enough to support the weight of the
unit.
To attach the base unit stand
Place the base unit stand by fitting the
tab into the slot on the base unit. Then
slide the stand until it clicks.
B
A
Screws
(Not supplied)
83 mm
Longer than
20 mm
Space
(2 mm)
TW501NZ(e).book Page 32 Wednesday, September 16, 2009 3:00 PM