Panasonic KX-TVM50, Installation Manual

Page: 96 / 200

b.
Set the port’s Connection to OUS .
c.
Select the attribute of DPT Property-Type to VM (DPT) .
d.
Assign DPT Property-VM Unit No. and DPT Property-VM Port No. . Incoming calls will hunt starting
at the lowest VM Port number.
e.
Click Apply to save the changed data.
f.
Set the port’s Connection to INS .
3.
Program the appropriate trunk feature settings depending on how your customer plans to use the VPS.
•
The VPS answers all incoming trunk calls promptly.
See Example Settings (1) later in this section.
•
The VPS answers when the operator does not take the call after a specified time.
See Example Settings (2) later in this section.
•
The VPS answers when an Incoming Call Distribution (ICD) group does not take the call after a
specified time.
See Example Settings (3) later in this section.
4.
Make sure all installation and line connections have been done as described in Section 2 Installation.
5.
Connect the jack assigned in Step 2 to the VPS.
6.
Complete the PBX-VPS connection by following from step 1 of 4.7 Completing the PBX-VPS
Connection.
96 Installation Manual Document Version 2.1 2008/04
4.2 KX-TDE and KX-TDA Series PBX Programming for DPT Integration