manualshive.com logo in svg

Panasonic KX-TVM50, Installation Manual

Share
Download
Panasonic KX-TVM50 Installation Manual Download Page 113

4.5  KX-TD500 PBX Programming for DPT Integration

Follow the procedure below to program the VPS card(s) for DPT Integration.

Programming procedures and availability may vary by country/area, software version, etc. Refer to the
documentation included with the PBX or consult your dealer for more information.

1.

Assignment of the VPS card to be connected to the VPS

Note

•

If the VPS card to which the VPS will be assigned is already installed in the KX-TD500, proceed
to step 2. If installing a new VPS card, begin with step 1.

a.

Go to the 

1-1 Slot Assignment

 screen.

b.

Assign the slot 

Card Type

 to be installed to 

DLC

 or 

DHLC

 card.

c.

Click 

Apply

 to save the card type assignment.

d.

Set 

Status

 to 

INS

.

Document Version  2.1  2008/04

Installation Manual

113

4.5 KX-TD500 PBX Programming for DPT Integration

Summary of Contents for KX-TVM50









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands