Panasonic KX-TVM50, Installation Manual

Page: 95 / 200

4.2 KX-TDE and KX-TDA Series PBX Programming
for DPT Integration
The screen shots shown in this section are for the KX-TDA200. Programming procedures and
availability may vary by country/area, software version, etc. Refer to the documentation included with
the PBX or consult your dealer for more information.
A group of DPT ports of the PBX connected to a VPS with DPT Integration is called a "VM (DPT) Group". Each
VM (DPT) Group consists of a maximum of 12 ports (24 channels) of the VPS, and each VM (DPT) Group can
be connected to a different VPS.
Maximum Number of VM (DPT) Groups
PBX Model Max. No. of VM (DPT) Groups
KX-TDE100/KX-TDE200 2
KX-TDA600 8
KX-TDA100/KX-TDA200 2
KX-TDA30 1
Through PBX system programming, you must assign the VM (DPT) Group and the VM (DPT) extension ports
that will use DPT Integration.
1.
Assignment of VM (DPT) Group
a.
Go to the Groups-VM(DPT) Group-Unit Setting screen.
b.
Assign a floating extension number to the VPS.
c.
Click Apply to save the changed data.
2.
Assignment of VM (DPT) extension ports
a.
Go to the Configuration-Extension Port screen. Follow the procedure below for the extension port
which you want to assign as a VM port.
Document Version 2.1 2008/04 Installation Manual 95
4.2 KX-TDE and KX-TDA Series PBX Programming for DPT Integration