Panasonic KX-TVM50 Installation Manual Download Page 192

Page: 192 / 200

8.3 Restarting the VPS

If the VPS is not functioning properly, restarting the VPS may resolve the issue. There are 3 methods for
restarting the VPS, explained below.

If the VPS does not function properly:

Select

Utility

System Initialise/Restart

Restart System

Click

to close all lines and restart the VPS.

Click

and wait for the VPS to restart.

If the VPS still does not function properly:

Press the

SHUTDOWN

button. The

RUN

indicator will begin flashing.

Wait for the

RUN

indicator to turn off and for the

ALARM

indicator to light.

Press the

RESET

button.

•

Pressing the

RESET

button before the

ALARM

indicator lights may cause the VPS to take an

exceptionally long time (up to 30 minutes) to start up again.

192

Installation Manual

Document Version 2.1 2008/04

8.3 Restarting the VPS

Summary of Contents for KX-TVM50









































































































































































































Search results

Summary of Contents for KX-TVM50

Reviews:

Brands by name

Popular brands

Panasonic KX-TVM50, Installation Manual

Search results

Summary of Contents for KX-TVM50

Reviews:

Brands by name

Popular brands