9
Preparation
8
Press
[#]
to select 24-hour clock, “AM”
or “PM”.
(Ex. You select “24-hour clock”.)
• Each time you press
[#]
, the selection will
change on the display.
9
Press .
10
Enter the current day and month using
a 4-digit number.
(Ex. To set Dec. 27, enter “2712”.)
11
Press .
• The clock starts working.
• The display will return to step 2. To exit
the programming mode, press
or
wait for 60 seconds.
• If the time and date entered are not correct, “
ERROR
” will be displayed and you
cannot continue with setting. Enter the correct time and date.
If the batteries installed in the unit expired, the time and date will be shown as
“
0:00 31/12
” or “
12:00
AM
31/12
” while talking or after the battery
replacement. Readjust the time/date.
For Caller ID service users (p. 14)
If a time display service is available with the Caller ID service:
The Caller ID information will re-set the clock after the ring if the adjusted time
and/or date is incorrect. However, if the time/date has not previously been set,
the Caller ID information will not adjust the clock.
#=AM/PM
09:30
31/12
Display
Option
AM
PM
AM
PM
24-hour clock
(Blank display)
ENTER DAY/MONTH
09:30
31/12
OK
ENTER DAY/MONTH
09:30
27/12
SAVED
OK
E-PQQX14361ZA.book 9 ページ
２００４年１０月２０日 水曜日 午後１時５２分
