34
Troubleshooting
Problem
Cause and Remedy
The unit does not work.
• Check the settings (p. 6 – 12).
• Remove the batteries and reinstall them
to reset the unit.
The unit does not ring.
• The ringer selector is set to OFF. Set to
HIGH or LOW (p. 11).
The display is blank.
• Install new batteries (p. 33).
You cannot dial.
• Check that the dialing mode selection is
correct (p. 10).
• Dial lock mode is set. To cancel the
mode, see page 30.
• The dialed number is restricted. To
cancel, see page 31.
You cannot program items
such as the dialing mode.
• Programming is not possible when the
handset is off the cradle.
• Do not pause for over 60 seconds while
programming.
You cannot store a name
and phone number in
memory.
• When using the Dial Lock (p. 30) or Call
Restriction feature (p. 31), you cannot
store an emergency number in the
Phone Book List.
• If “
PHONEBOOK FULL
” is displayed,
erase other stored items from the Phone
Book List (p. 26).
• Programming is not possible when the
handset is off the cradle.
• Check that the batteries are installed in
the unit and that the battery power is not
low.
• Do not pause for over 60 seconds while
storing.
• Do not enter a phone number more than
22 digits long.
E-PQQX14361ZA.book 34 ページ
２００４年１０月２０日 水曜日 午後１時５２分
