21
Ad
v
anced Operation
6
Press .
• To continue storing other items, repeat
from step 2.
• The display will return to step 1. To exit
the programming mode, press
or wait
for 60 seconds.
• If the display shows “
PHONEBOOK FULL
” in step 2, press
to exit. To erase other
stored items from the Phone Book List, see page 26.
• You can exit the programming mode any time by pressing
.
• If a pause is required for dialing, press
where needed. If required, you can
also store
in a phone number. Pressing
or
counts as one digit
(p. 27, 28).
• To store numbers for calling card access (see “Chain Dial” on page 24), we
recommend you add pauses after each item. Storing pauses with numbers will
prevent misdialing (p. 27). The delay time necessary will depend on your
telephone company.
• When using the Dial Lock (p. 30) or Call Restriction feature (p. 31), you cannot
store the emergency number in the Phone Book.
• If the display shows “
DIAL LOCKED
” or “
CALL RESTRICTED
” in step 4, you cannot
store the emergency number in the Phone Book. See page 30, 31.
• When the dialing buttons are locked (p. 30), only numbers stored in the Phone
Book as emergency numbers can be dialed.
• When storing a name, you can also enter space by pressing
[0]
twice. Items with
space at the beginning will be displayed with first priority.
See page 23.
To store an emergency number:
When storing a name in step 3 on page 20, enter # at the beginning of the
name by pressing
[#]
. See page 22.
• Items with # at the beginning will be displayed with first priority if DIAL LOCK or
CALL RESTRICTION is set to ON. See page 30, 31.
SAVED
OK
R
R
E-PQQX14361ZA.book 21 ページ
２００４年１０月２０日 水曜日 午後１時５２分
