Panasonic KX-TSC11HGW Operating Instructions Manual Download Page 30

Page: 30 / 40

Special Features

Dial Lock

The Dial Lock feature allows you to prevent others from making calls. To
use this feature, turn the feature ON. The factory preset is OFF.

To set the dial lock

Press .

• “

” flashes on the display.

Enter the password (p. 29).

Press .

• “

” displays.

• If the wrong password was entered,

“

ERROR

” will be displayed, then “– – – –”

will be displayed. Enter the correct
password.

To cancel the dial lock

Follow above steps 1 through 3. In step 3, “

” will go out.

Before using the Dial Lock or Call Restriction feature (p. 31), we recommend
storing emergency numbers in the Phone Book (p. 20, 21). When the Dial Lock
is ON, only numbers stored in the Phone Book as emergency numbers can be
dialed.

If the dial buttons are pressed after lifting the handset, “

DIAL LOCKED

” will be

displayed.

You can use the following features while the dialing buttons are locked.
• Dialing

emergency items which programmed into the memory of the Phone

Book by pressing

[ ]

(p. 21)

• Selecting the ringer volume (p. 11)
• Adjusting the handset volumes (p. 13)
• Answering the second call by pressing

(p. 28)

• Programming (except storing/erasing

emergency items in the Phone Book

List)

• Finding an item in the following lists

—Caller list (p. 15)
—Phone Book List (p. 23)
—Redial list (p. 13)

ENTER PASSWORD

E-PQQX14361ZA.book 30 ページ

２００４年１０月２０日水曜日午後１時５２分

Summary of Contents for KX-TSC11HGW









































Search results

Summary of Contents for KX-TSC11HGW

Reviews:

Related manuals for KX-TSC11HGW

Brands by name

Popular brands

Panasonic KX-TSC11HGW, Operating Instructions Manual

Search results

Summary of Contents for KX-TSC11HGW

Reviews:

Related manuals for KX-TSC11HGW

Brands by name

Popular brands