Panasonic KX-TSC10FXW Page 33 Operating Instructions Manual Download

Page: 33 / 36

Useful Inf

ormation

While programming or
searching, the unit starts to
ring and stops the program/
search.

• To answer the call, lift the handset. Start

again from the beginning after hanging
up.

The unit does not display
the caller’s phone number.

• You need to subscribe to a Caller ID

service.

• Install or replace the batteries.
• Other telephone equipment may be

interfering with your phone. Disconnect
it and try again.

• Telephone line noise may be interfering

with the Caller ID information. Consult
your telephone company.

The display exits the Caller
List.

• Do not pause for over 60 seconds while

searching.

You cannot redial by
pressing

[REDIAL/PAUSE]

• If the last number dialed was more than

32 digits long, the number will not be
redialed correctly.

Information stored in the
Caller List or the Redial List
is erased.

• If “

” flashes, replace the batteries as

soon as possible. Otherwise,
information stored in the Caller List or
the Redial List may be erased. Store the
desired item in the Speed Dial List, if
necessary.

Problem

Cause and Remedy

Summary of Contents for KX-TSC10FXW





































Search results

Summary of Contents for KX-TSC10FXW

Reviews:

Related manuals for KX-TSC10FXW

Brands by name

Popular brands

Panasonic KX-TSC10FXW, Operating Instructions Manual

Search results

Summary of Contents for KX-TSC10FXW

Reviews:

Related manuals for KX-TSC10FXW

Brands by name

Popular brands