15
Listening to Messages
“
You can see the total number of recorded messages on the display. If the
ANSWER indicator flashes, new messages have been recorded.
Listening to only new messages
Press
(NEW\MESSAGE)
briefly.
≥
The unit announces the number of new messages and plays them back.
≥
If there are no new messages, “
No new messages
” is heard.
Listening to all recorded messages
Press and hold
(NEW\MESSAGE)
until a short beep sounds.
≥
If there are no messages, “
No messages
” is heard.
To adjust the speaker volume (9 levels):
While using the answering system, press VOLUME/SEARCH
(^)
or
(_)
.
≥
The display shows the volume level.
(STOP)
VOLUME/SEARCH
(^)
,
(_)
(NEW\MESSAGE)
(SKIP/FF)
(REPEAT/REW)
14
≥
If you do not want the unit to answer calls, press
(ANSWER–ON)
again to
turn off the answering system. The ANSWER indicator light goes out and
“
Answer off
” is heard.
≥
You can also turn on the answering system remotely using any other
phone (p. 29).
Monitoring incoming calls
While a call is being recorded, you can monitor it through the speaker.
To answer the call, lift the handset of the telephone connected to the same
line. The unit stops recording.
≥
You can adjust the volume by pressing VOLUME/SEARCH
(^)
or
(_)
.
≥
If the answering machine does not stop recording when you lift the
handset, press
(STOP)
.
≥
KX-TM150ALB will not answer incoming calls on your FaxAbility number
(New Zealand only).
“
Automatic Answering Operation
PQQX12356ZA-BM
01.3.22 3:56 PM y [ W 14
