Press
(STOP)
.
≥
To resume playback, press
(NEW\MESSAGE)
.
≥
If you do not press any button for 60 seconds or if you
press
(STOP)
again, the unit will return to the stand-by
mode.
To repeat from the beginning of the message
Press
(REPEAT/REW)
briefly.
≥
If you press within 5 seconds of playback, the
previous message will be played.
To rewind part of the message
Press and hold
(REPEAT/REW)
until you reach the
desired place.
≥
At the beginning of the message, 3 short beeps will
sound.
17
16
Erasing Messages
1
Press
(ERASE)
.
≥
“
Press ERASE again to erase all
messages
” is heard.
2
Within 5 seconds, press
(ERASE)
again.
≥
A beep sounds and
“
No messages
” is heard.
≥
The display shows
“
0 message
”.
≥
After the announcement, the
display will return to the
stand-by mode.
The unit will announce the remaining recording time after playback, if it is
less than 5 minutes. New messages cannot be recorded when:
—“
Memory full
” is heard.
—“
Message full
” is displayed.
—the ANSWER indicator flashes rapidly.
Erase some, or all, of the messages. We recommend you erase
unnecessary messages after each playback.
Erasing a specific message
Press
(ERASE)
while the message you want to erase is being played.
≥
The unit erases the message.
≥
A short beep will sound and the unit will continue to play the next
message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at
one time.
≥
The information in the Caller List will not be erased. To erase the Caller
List information, see page 24.
(ERASE)
“
Listening to Messages
During playback
To skip to the next message
Press
(SKIP/FF)
briefly.
To cue to part of the message
Press and hold
(SKIP/FF)
until you reach the desired
place.
≥
The message will be heard at twice the normal speed.
≥
At the end of the message, 3 short beeps will sound.
To repeat/
rewind
message
To skip/cue
message
To stop
operation
For Caller ID service users
(p. 19)
After listening to new incoming messages, “
√
” will be added to the call
entries in the Caller ID Caller List (p. 21).
≥
During playback, the display shows which message is being played.
(Ex. While the first message is being played back, “
Message 1
” is
displayed.)
≥
At the end of the last message, “
End of final message
” is heard. The
unit will announce the remaining recording time if it is less than
5 minutes.
≥
All recorded messages are saved until you erase them.
PQQX12356ZA-BM
01.3.22 3:56 PM y [ W 16
