*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID auto
”
. To turn this feature off, select
“
Manual
”
. (Caller ID subscribers only)
To use this feature, set the date and time first (page 21).
*4 If you subscribe to a distinctive ring service, select one of the ringers (
“
Ringer 1
”
to
“
Ringer 5
”
).
*5 The preset ringers in this product (
“
Ringer 6
”
-
“
Ringer 15
”
) are used with permission
of © 2004 - 2013 Copyrights Vision Inc.
*6 If you select one of the ringers (
“
Ringer 1
”
to
“
Ringer 5
”
), select the desired frequency
(
“
Frequency 1
”
to
“
Frequency 6
”
).
*7 This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
*8 For models with supplied key detectors, the display shows “
1:
Detector1
”.
*9 If you register 2 or more key detectors.
*10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*11 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*12 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to
“
A
”
if telephone line condition is not good.
For assistance, visit www.panasonic.ca/english/support
47
Programming
TGM470_490C(en)_0805_ver403.pdf 47
2021/08/05 10:23:30
