Panasonic KX-TGM470C, Operating Instructions Manual

Page: 27 / 76

Setting the talking keypad
You can enable this feature by setting its volume to “
High
” or
“
Low
” , and disable it by setting its volume to “
Off
” . The default
setting is “
Off
” . This feature can be set for each handset.
1
M MENU N#750
2
MbN : Select the desired setting. a M SAVE N a M OFF N
Note:
R If you dial a phone number quickly, the handset may not announce the dialed phone number
correctly. For best results, dial slowly, and wait for the handset to announce each number
before dialing the next.
Key tones
Use this procedure to change the volume of the tones that sound
when you press keys on the handset and base unit, or to turn them
off. The default setting is
“
Low
” . Includes confirmation tones and
error tones, etc. This feature can be set for each unit.
1
For handset: M MENU N#165
For base unit (using a handset): M MENU N#*165
2
MbN : Select the desired setting. a M SAVE N a M OFF N
Message indicator
The message indicator on the handset and base unit can indicate
unit status, as explained below.
Indicator Status
Flashing rapidly – Outside call or intercom call is being received or on hold. (page 31,
32, 34)
– The handset alarm is sounding. (page 48)
Flashing slowly – There are new messages. (page 55)
– There are new voicemails. (page 61)
– There are missed calls. (page 52)
For assistance, visit www.panasonic.ca/english/support 27
Accessibility
TGM470_490C(en)_0805_ver403.pdf 27 2021/08/05 10:23:28