Panasonic KX-TGF352 Operating Instructions Manual Download

Page: 46 / 68

the voicemail service provided by your phone
service provider before changing this setting.

– Change the number of rings of the voicemail

service so that the answering system can
answer the call first. To do so, contact your
phone service provider.

Caller’s recording time

You can change the maximum message recording
time allowed for each caller. The default setting is

“

3 min

”

You can configure this setting using either the
base unit or one of the handsets.

Handset / Base unit

MENU

N#305

MbN

: Select the desired setting.

SAVE

Proceed with the operation for your unit.

Handset:

OFF

Base unit:

EXIT

Selecting “

Greeting only

”

You can select

“

Greeting only

”

which sets the

unit to announce a greeting message to callers but
not record messages.
Select

“

Greeting only

”

in step 2 on “Caller’s

recording time”, page 46.

Note:

When you select

“

Greeting only

”

– If you do not record your own message, the

unit will play the pre-recorded greeting-only
message asking callers to call again later.

– If you use your own message, record the

greeting-only message asking callers to call
again later (page 40).

For assistance, please visit http://shop.panasonic.com/support

Answering System

TGF35x(en)_0303_ver101.pdf 46

2016/03/03 12:12:52

Summary of Contents for KX-TGF352





































































Search results

Summary of Contents for KX-TGF352

Reviews:

Related manuals for KX-TGF352

Brands by name

Popular brands

Panasonic KX-TGF352, Operating Instructions Manual

Search results

Summary of Contents for KX-TGF352

Reviews:

Related manuals for KX-TGF352

Brands by name

Popular brands