Panasonic KX-TG9120FX, Operating Instructions Manual

Page: 46 / 272

I
Answering System Features
46
system by calling the unit even when it is
turned off (page 46). This call may be
answered before the ring delay feature of
the night mode (page 29, 34) activates.
You need to select
“
30 sec.
” for
activating the ring delay feature.
Using the answering system
remotely
1
Dial your phone number from a touch
tone phone.
2
After the greeting message starts, enter
your remote access code.
L
The unit will announce the number of
new messages.
3
Enter remote commands.
Note:
L
You can hang up at any time.
L
If less than 5 minutes of recording time is
available, the unit will announce the
remaining recording time after the last
message is played back.
Remote commands
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1
Dial your phone number from a touch
tone phone.
2
Let the phone ring 9 times.
L
Turkey:
If you change the unit’s region setting
to
(page 35), the phone
rings 10 times.
L
A long beep will be heard.
3
Enter your remote access code within 10
seconds after the long beep.
L
The greeting message is played back.
L
You can hang up, or enter your remote
access code again and begin remote
operation.
Key Remote command
{
1
}
Repeat message (during
playback)
*1
{
2
}
Skip message (during
playback)
{
4
}
Play new messages
{
5
}
Play all messages
{
6
}
Play greeting message
{
7
}
Record greeting message
{
9
}
Stop (recording, playback)
{
0
}
Turn answering system off
{*}{
4
}
Erase this message (during
playback)
{*}{
5
}
Erase all messages
{*}{
6
}
Erase greeting message
(during greeting message
playback)
{*}{
#
}
End remote operation (or
hang up)
*1 If pressed within the first 5 seconds of
a message, the previous message will
be played.
Key Remote command
“ “
T
ü
rkiye rkiye
”
TG9120FX(e).book Page 46 Tuesday, August 29, 2006 9:44 AM