Panasonic KX-TG8200FX Operating Instructions Manual Download Page 47

Page: 47 / 56

Useful Information

Error messages

*1 KX-TG8220

Error message

Cause & solution

Answer Sys. Full

Erase unnecessary messages (page 36).

Error

Recording was too short. Try again.

Failed

Phonebook copy failed. Confirm the other handset
(the receiver) is in standby mode and try again.

Incomplete

The receiver’s phonebook memory is full. Erase the
unnecessary phonebook entries from the other
handset (the receiver) and try again.

Invalid Number

You tried to send an SMS message to a phone number
saved in the handset phonebook, caller list, or redial
list that is over 20 digits long.

Memory Full

The handset’s phonebook memory is full. Erase
unnecessary entries (page 19).

Message memory becomes full. Erase unnecessary
messages (page 36).

No link to base.
Move closer to
base, try again.

The handset has lost communication with the base
unit. Move closer to the base unit and try again.

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

The handset’s registration may have been cancelled.
Re-register the handset (page 40).

SMS Full

Erase unnecessary messages (page 32, 33).

You must first
subscribe to
Caller ID.

You must subscribe to Caller ID service. Once you
receive caller information after subscribing to Caller ID
service, this message will not be displayed.

TG8200_8220FX(e-e).book Page 47 Monday, August 6, 2007 5:25 PM

Summary of Contents for KX-TG8200FX

























































Search results

Summary of Contents for KX-TG8200FX

Reviews:

Related manuals for KX-TG8200FX

Brands by name

Popular brands

Panasonic KX-TG8200FX, Operating Instructions Manual

Search results

Summary of Contents for KX-TG8200FX

Reviews:

Related manuals for KX-TG8200FX

Brands by name

Popular brands