h
Base Unit Settings
18
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Base unit settings
To customise the base unit:
1
{
MENU
}
(right soft key)
2
Select
h
by pressing
{^}
,
{V}
,
{
<
}
, or
{
>
}
.
i
{
OK
}
3
Enter the base unit PIN (Personal Identification Number; default:
“
0000
”
).
i
{
OK
}
4
Press
{^}
or
{V}
to select the desired item in the base unit settings menu.
i
{
OK
}
5
Press
{^}
or
{V}
to select the desired item in the sub-menu.
i
{
OK
}
6
Press
{^}
or
{V}
to select the desired setting then press
{
OK
}
.
L
This step may vary depending on the feature being programmed.
L
To exit the operation, press
{i}
.
Note:
L
Use the handset to customise the base unit.
L
The selected item is highlighted on the display. The currently activated setting is indicated by “
t
”
located on the left of the item on the display.
*1 Change the recall time, if necessary, depending on the requirements of your service
provider/telephone company or PBX.
*2 If you store the PBX access number, a pause will be added automatically between the PBX access
number and the first digit of the phone number when you make calls.
*3 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.
*4 If you forget your PIN, consult your nearest Panasonic service centre.
Menu
Sub-menu
Details (default setting)
Ringer Setup
Ringer Volume
For base unit (
“
Volume 3
”
)
Ringtone
(
“
Ringtone 1
”
)
Call Options
Dial Mode
(
“
Tone
”
): page 12
Recall/Flash
Recall time (
“
100 msec.
”
)
*1
PBX Access No.
Enter the 1-digit code.
i
{
OK
}
*2
Base Unit PIN
—
Change base unit PIN (
“
0000
”
).
*3
– Enter the new 4-digit base unit PIN.
*4
i
{
OK
}
– Enter the new 4-digit base unit PIN again.
i
{
OK
}
TG8070-8090E(e).book Page 18 Monday, June 11, 2007 8:12 PM
