Useful Information
46
*1 KX-TG6521
Battery recharge
Making/answering calls, intercom
I cannot register a handset to a
base unit.
L
The maximum number of handsets (6) is already
registered to the base unit. Cancel unused handset
registrations from the base unit (28. oldal).
L
You entered the wrong PIN. If you forget your PIN,
contact an authorised service centre.
Problem
Cause/solution
The handset beeps and/or
)
flashes.
L
Battery charge is low. Fully charge the batteries (8.
oldal).
I fully charged the batteries, but
–
)
still flashes or
– the operating time seems to be
shorter.
L
Clean the battery ends (
S
,
T
) and the charge
contacts with a dry cloth and charge again.
L
It is time to replace the batteries (8. oldal).
The handset display is blank.
L
The handset is not turned on. Turn the power on
(12. oldal).
Problem
Cause/solution
_
is displayed.
L
The handset is too far from the base unit. Move
closer.
L
The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the base unit.
L
The handset is not registered to the base unit.
Register it (27. oldal).
L
Activating one touch eco mode reduces the range
of the base unit in standby mode. If required, turn
eco mode off (13. oldal).
Noise is heard, sound cuts in and
out.
L
You are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
L
Unplug the base unit’s AC adaptor to reset the unit
and turn off the handset. Reconnect the adaptor,
turn on the handset and try again.
Problem
Cause/solution
TG6511-6521HG(e-hg).book Page 46 Friday, January 22, 2010 2:49 PM
