Programmable Settings
26
Ringer Tone
You can set the handset and base unit ringers to use one of 8 ringer patterns for
each line. “Tone 1” to “Tone 4” are bell ringer patterns. “Melody 1” to “Melody 4” are
melody patterns. LINE 1 is preset to “Tone 1”. LINE 2 is preset to “Tone 2”.
•
You cannot change the ringer tone for intercom calls.
•
If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your
telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone
1 to 4). If you select a melody pattern, you will not be able to distinguish lines by
their ringers.
•
If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same line.
•
If LINE 1 and LINE 2 have different ringer patterns and both lines receive calls
simultaneously, both ringers will ring alternately.
Handset ringer tone
1
Press
[MENU]
.
2
Scroll to “
Ringer setting
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
3
Scroll to “
Ringer tone
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
4
Press
[
d
]
(
Line1
) or
[
B
]
(
Line2
) to select
the line.
5
Select the desired ringer tone by pressing
[
d
]
or
[
B
]
.
•
The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring.
•
You can also select the ringer tone by pressing
[1]
to
[8]
.
[1]
to
[4]
: Bell ringer patterns
[5]
to
[8]
: Melody patterns
To adjust the ringer volume, press the soft key (
). Adjust the
ringer volume by pressing
[
d
]
or
[
B
]
. See “Handset ringer volume”
on page 24, step 5.
6
Press the soft key (
).
•
To select the other line, repeat from step 3.
7
Press
[OFF]
.
Handset
SELECT
Ringer setting
SELECT
Ringer tone
Ringer tone
d
=Line1
B
=Line2
Ringer tone
L1
1:Tone
1
d
B
BACK
VOLUME
SAVE
VOLUME
SAVE
TG6500.book Page 26 Friday, June 25, 2004 6:56 PM