Useful Information
35
Battery recharge
Making/answering calls, intercom
*1 KX-TG6022
Problem
Cause/solution
I fully charged the battery,
but
7
continues to flash,
or
8
is displayed.
L
Clean the charge contacts and charge again
(page 10).
L
The battery may need to be replaced with a new
one (page 10).
The handset display is
blank.
L
Confirm that the battery is properly installed.
L
Fully charge the battery (page 10).
While charging, the charge
indicator does not light and
“
Charge for 7h
” is
displayed.
L
The battery is empty. The charge indicator does
not light in order to concentrate on charging.
After about 5 minutes, the charge indicator lights
and “
Charging
” is displayed.
Problem
Cause/solution
Static is heard, sound cuts
in and out. Interference
from other electrical units.
L
Move the handset and base unit away from
other electrical appliances.
L
Move closer to the base unit.
L
Turn on the clarity booster feature (page 17).
L
Your unit is connected to a telephone line with
ADSL (JetStream) service. We recommend that
you contact your ADSL service provider to have
an ADSL Splitter installed. We do not
recommend the use of generic ADSL filters.
Contact your ADSL provider for details.
The handset does not ring.
L
The ringer volume is turned off. Adjust it (page
25).
I cannot make a call.
L
Another handset is in use. Try again later.
*1
L
If the above remedy does not solve the problem,
set the dialling mode. Press
{
MENU
} {
0
} {
5
}
{
1
} {
Save
} {
OFF
}
.
L
The unit is not designed to be used with rotary
(pulse dialling) services.
I cannot have a
conversation using the
headset.
L
Make sure that an optional headset is
connected properly (page 32).
L
If “
SP-phone
” is displayed on the handset,
press
{C}
to switch to the headset.
I cannot page the handset.
L
The called handset is too far from the base unit.
L
The called handset is in use. Try again later.
