Useful Information
33
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message
Cause/solution
Base no power
or
No link.
Reconnect AC
adaptor.
L
The handset has lost communication with the base
unit. Move closer to the base unit and try again.
L
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L
The handset’s registration may have been cancelled.
Re-register the handset (page 25).
Check Phone Line
L
The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 8).
Failed
L
Phonebook copy failed (page 19). Confirm the other
handset (the receiver) is in standby mode and try
again.
Incomplete
L
The receiver’s phonebook memory is full. Erase the
unwanted phonebook entries from the other handset
(the receiver) and try again.
Memory Full
L
The phonebook memory is full. Erase unwanted
entries (page 18).
Use rechargeable
battery.
L
A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 6.
You must first
subscribe to
Caller ID.
L
You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
TG5511-6511-6512CX(e-e).book Page 33 Tuesday, May 11, 2010 11:46 AM