Panasonic KX-TG5511BX Operating Instructions Manual Download Page 43

Page: 43 / 48

Useful Information

*1 KX-TG6521

Battery recharge

Making/answering calls, intercom

I cannot activate the eco mode.

You cannot set eco mode when you set the
repeater mode

“

”

. If required, set the

repeater mode to

“

Off

”

(page 28).

I cannot register a handset to a
base unit.

The maximum number of handsets (6) is
already registered to the base unit. Cancel
unused handset registrations from the base
unit (page 28).

You entered the wrong PIN. If you forget your
PIN, contact an authorised service centre.

Problem

Cause/solution

The handset beeps and/or

)

flashes.

Battery charge is low. Fully charge the
batteries (page 9).

I fully charged the batteries, but
–

)

still flashes or

– the operating time seems to

be shorter.

Clean the battery ends (

) and the

charge contacts with a dry cloth and charge
again.

It is time to replace the batteries (page 8).

The handset display is blank.

The handset is not turned on. Turn the power
on (page 14).

Problem

Cause/solution

is displayed.

The handset is too far from the base unit.
Move closer.

The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the
base unit.

The handset is not registered to the base unit.
Register it (page 27).

Activating one touch eco mode reduces the
range of the base unit in standby mode. If
required, turn eco mode off (page 15).

Problem

Cause/solution

TG5511_6511_6521BX(e).book Page 43 Tuesday, June 8, 2010 9:17 AM

Summary of Contents for KX-TG5511BX

















































Search results

Summary of Contents for KX-TG5511BX

Reviews:

Related manuals for KX-TG5511BX

Brands by name

Popular brands

Panasonic KX-TG5511BX, Operating Instructions Manual

Search results

Summary of Contents for KX-TG5511BX

Reviews:

Related manuals for KX-TG5511BX

Brands by name

Popular brands