Useful Information
42
For assistance, please visit http://www.panasonic.com/help
Programmable settings
Battery recharge
Problem
Cause/solution
I cannot program items.
L
Programming is not possible while either the
base unit or another handset is being used. Try
again later.
I cannot set the alarm.
L
In order to set the alarm, you must first set the
date and time (page 14).
L
The handset has lost the communication with
the base unit. Move closer to the base unit, and
try again.
While programming, the
handset starts to ring.
L
A call is being received. Answer the call and
start again after hanging up.
Problem
Cause/solution
I fully charged the battery,
but
7
continues to flash,
or
8
is displayed.
L
Clean the charge contacts and charge again
(page 11).
L
The battery may need to be replaced with a new
one (page 10).
The handset display is
blank.
L
Confirm that the battery is properly installed.
L
Fully charge the battery (page 10).
While charging, the charge
indicator does not light and
“
Charge for 7h
” is
displayed.
L
The battery is empty. The charge indicator does
not light in order to concentrate on charging.
After about 5 minutes, the charge indicator lights
and “
Charging
” is displayed.
TG30xx.book Page 42 Thursday, February 1, 2007 5:19 PM