Preparation
For assistance, please visit http://www.panasonic.com/help
9
Setting up the base
unit
Connecting the AC adaptor
and telephone line cord
Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (
A
). Connect the AC adaptor
cord (
B
) by pressing the plug firmly
(
C
).
L
Use only the included Panasonic AC
adaptor PQLV203.
Note:
L
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L
The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the
adaptor may cause it to become
disconnected.
L
The unit will not work during a power
failure. We recommend connecting a
corded telephone to the same
telephone line or to the same
telephone line jack using a Panasonic
T-adaptor (page 5).
If you subscribe to a DSL service
Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the
telephone line jack in the event of the
following:
– Noise is heard during conversations.
– Caller ID features do not function
properly.
Setting up the handset
Connecting the AC adaptor
L
Use only the included Panasonic AC
adaptor PQLV208.
(120 V AC, 60 Hz)
A
B
To single-line
telephone
jack (RJ11C)
Hooks
C
Available model:
KX-TG3032/KX-TG3033/
KX-TG3034
Noise filter
To single-line
telephone
jack (RJ11C)
(120 V AC, 60 Hz)
Fasten the AC adaptor cord to
prevent it from being disconnected.
Bottom of the charger
Hooks
Hooks
TG30xx.book Page 9 Thursday, February 1, 2007 5:19 PM
