Panasonic KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering System Page 28 Operating Instructions Manual Download

Page: 28 / 88

Making Calls

Using the Base Unit

You can make a call by simply lifting the handset off the cradle and dialing
a phone number. To hang up, place the handset on the cradle.

•

“

Talk

” is displayed while using the handset.

To have a hands-free phone

conversation

To adjust the handset/speaker volume during a conversation

3 levels (High, Medium and Low) are available for the
handset and 8 levels for the speaker.

To increase, press

[ ]

. To decrease, press

[ ]

•

The number of steps indicates the volume level.

•

If you try to increase/decrease volume when it is at the
maximum/minimum level, the base unit will beep 3 times.

Press

[DIGITAL SP-PHONE]

•

The indicator lights and “

SP-phone

”

is displayed.

Dial a phone number.

•

The dialed number is displayed.

•

After a few seconds, the display will
show the length of the call.

•

If you misdial, press

[DIGITAL

SP-PHONE]

and start again from

step 1.

When the other party answers, talk
into the

MIC

(microphone).

To hang up, press

[DIGITAL

SP-PHONE]

•

The indicator goes out.

Hands-free Digital Duplex Speakerphone

For best performance, please note the following:

•

Talk alternately with the other party in a quiet room.

•

If you or the other party has difficulty hearing, press

[ ]

to decrease the

speaker volume.

•

You can switch to the handset by lifting it up. To switch back to the
speakerphone, press

[DIGITAL SP-PHONE]

Base Unit

[REDIAL/PAUSE]

[STOP]

[ ]

MIC

[HOLD]

[DIGITAL SP-PHONE]

and Indicator

[ERASE]

Ex. Handset volume: High

Loud

Low

High

TG2970.book Page 28 Friday, October 15, 2004 6:21 PM

Summary of Contents for KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering System

























































































Search results

Summary of Contents for KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering System

Reviews:

Related manuals for KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering System

Brands by name

Popular brands

Panasonic KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering System, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering System

Reviews:

Related manuals for KX-TG2970B - GigaRange SecurityLink Plus Expandable Answering System

Brands by name

Popular brands