Panasonic KX-TG2650CN Operating Instructions Manual Download

Page: 33 / 68

Advanced Operation

To erase a specific caller
from the Caller List

With the handset/base unit:

Press

to enter the

Caller List.

Press

repeatedly to

find the caller you want to
erase from the Caller List.

If using the handset, press

(CLEAR/INTERCOM)

OR
If using the base unit, press

(CLEAR)

•

A beep sounds and the
information is erased.

•

To erase other items, repeat
from step 2.

•

To return to the standby mode, if
using the handset, press

(OFF)

If using the base unit, press

(EXIT)

To erase all entries in the
Caller List

Before erasing all entries, make
sure that “

0 new caller

” is

displayed.

With the handset/base unit:

Press

to enter the

Caller List.

If using the handset, press

(CLEAR/INTERCOM)

OR
If using the base unit, press

(CLEAR)

Press

to select “

All

clear

”.

Press

(

Yes

key).

•

A beep sounds and all entries
are erased.

Exit

All clear

=Yes

All clear

0 new caller

=Directory

Exit
All clear

=Yes

Erasing Caller List Information

After checking the Caller List, you can erase some or all of the entries
with the handset or the base unit.
Make sure the unit is in the standby mode initially.

TOM REAGAN
1-888-777-6666
12:20A JAN.12

√

Clear

10 new callers

=Directory

Summary of Contents for KX-TG2650CN





































































Search results

Summary of Contents for KX-TG2650CN

Reviews:

Related manuals for KX-TG2650CN

Brands by name

Popular brands

Panasonic KX-TG2650CN, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2650CN

Reviews:

Related manuals for KX-TG2650CN

Brands by name

Popular brands