Panasonic KX-TG2650CN Operating Instructions Manual Download

Page: 44 / 68

Intercom

A 2-way intercom is possible between the handset and the base unit.

Paging the base unit from the handset

Handset:
Press

(CLEAR/INTERCOM)

Talk to the paged party after the
beeps.

•

“

Intercom

” is displayed.

Base unit:
When the other party’s voice is
heard, answer using the MIC.

Handset:
To end the intercom, press

(OFF)

Paging the handset from the base unit (Handset locator)

Using this feature, you can locate a misplaced handset.

Base unit:
Press

(LOCATOR/INTERCOM)

•

“

Paging

” is displayed on the

base unit.

•

The handset beeps for 1 minute
and “

Paging Press

INTERCOM

” is displayed.

•

To stop paging, press

(LOCATOR/INTERCOM)

again.

Handset:
Press

(CLEAR/INTERCOM)

answer.

•

“

Intercom

” is displayed.

Base unit:
Talk into the MIC.

Handset:
To end the intercom, press

(OFF)

(CLEAR/INTERCOM)

MIC

(OFF)

(CLEAR/INTERCOM)

MIC

(LOCATOR/INTERCOM)

(OFF)

Summary of Contents for KX-TG2650CN





































































Search results

Summary of Contents for KX-TG2650CN

Reviews:

Related manuals for KX-TG2650CN

Brands by name

Popular brands

Panasonic KX-TG2650CN, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2650CN

Reviews:

Related manuals for KX-TG2650CN

Brands by name

Popular brands