Panasonic KX-TG2650CN Operating Instructions Manual Download | Manualshive

Page: 9 / 68

background image

Displays

9

Preparation

Base unit

#

The display shows the dialed number,
call status, programming options and
directory items etc.
If you subscribe to a Call Display service,
caller information will be displayed
(p. 26). The number of new calls will also
be displayed.

Handset

#

The display shows the dialed number,
call status, programming options and
directory items etc. If you subscribe to a
Call Display service, caller information
will be displayed (p. 26). The number of
new calls will also be displayed.

$

The voice mail icon indicates you have received voice mail messages
(p. 46).

%

The directory icon displays when viewing the directory items (p. 40).

$

The voice mail icon indicates you have received voice mail messages
(p. 46).

%

The directory icon displays when storing or viewing the directory items
(p. 36, 40).

&

The battery icon indicates the battery strength (p. 11).

Standby mode:
While the handset is off the base unit, the display becomes blank after
you finish using the handset (making/answering a call, viewing the Caller
List or directory list etc.). The handset can receive calls. The battery life is
conserved in this state. While the handset is on the base unit, the battery
icon and the number of new Call Display calls are displayed in the
standby mode (p. 27).

Backlight LCD Displays

The handset and the base unit have the backlight LCD displays. Each
display will light when you start using the handset or the base unit, and
when a call is received. The handset display light will stay on for about 10
seconds after pressing a button or lifting the handset off the base unit.
The base unit display light will go out after use.
You can change the backlight colour to orange for certain callers by
storing them in the directory (p. 35).

#

$

$

#

%

0 new caller

&

%

0 new caller

«
...
7
8
9
10
11
...
»

Summary of Contents for KX-TG2650CN





































































Reviews:

No comments

Related manuals for KX-TG2650CN

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Dialog 4106 Basic

Brand: Aastra Pages: 2

Brand: EastLink Pages: 28

Brand: Aastra Pages: 461

Brand: Aastra Pages: 40

Brand: Aastra Pages: 47

Brand: Aastra Pages: 47

Brand: Karel Pages: 43

Brand: BBK Pages: 18

Brand: Binatone Pages: 2

Brand: Ciro Pages: 2

DCT758-3 - DCT Cordless Phone

Brand: Uniden Pages: 84

Brand: Getek Pages: 6

Brand: Topcom Pages: 19

Brand: TDS Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands