Panasonic KX-TG2481CB Operating Instructions Manual Download Page 33

Page: 33 / 84

Cordless Telephone

To check the number of new calls

•

If “

No items stored

” is displayed, the Caller List is empty.

•

Caller information cannot be displayed in the following cases:

•

—If the caller dialed from an area which does not provide a Call Display service,

the display will show “

Unavailable Name & No.

”.

•

—If a long distance call is identified, and the caller’s name and/or number cannot

be received, the display will show “

Long distance

”.

•

—If the caller has requested not to display his/her information, the display will

show “

Private caller

”.

•

If your unit is connected to a PBX which does not support Call Display services,
you cannot access those services.

•

The name display service may not be available in some areas. For further
information, please contact your telephone company.

While the handset is off the base unit:

The unit must be in the standby mode.

Press

to turn the display on.

If you have received 10 new calls,
the display will show the following:

While the handset is on the base unit:

If you have received 10 new calls,
the display will show the following:

10 new callers

=Directory

Summary of Contents for KX-TG2481CB





















































































Search results

Summary of Contents for KX-TG2481CB

Reviews:

Related manuals for KX-TG2481CB

Brands by name

Popular brands

Panasonic KX-TG2481CB, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2481CB

Reviews:

Related manuals for KX-TG2481CB

Brands by name

Popular brands